PRACTICAL, SUSTAINABLE, BEAUTIFUL
Our permeable pavers are perfect for patios, pathways, driveways, car parks, swimming pool surrounds, outdoor showers and more. Plus, this permeable technology has a lower heat island
Available only from JAGAS
JAGAS is the only company in New Zealand to offer permeable paving that is both porous and suitable for vehicle loadings. JAGAS HydroPavers are of an advanced ceramic construction that combines high strength, high porosity and excellent water retention. They also carry a Codemark certification for acceptability by Local Authorities.
HydroPavers have excellent Green properties, both in their behaviour in the environment (see below) and by being manufactured from recycled porcelain.
How Are Hydropavers Made?
Features & Benefits
Permeability and Water Retention
JAGAS HydroPavers are truly permeable, meaning that water flows through the surface of the
They will hold the first 11mm of rainfall inside the void spaces in the paver (20% of volume). This works out to be 3.9L/ m2 of floor area. After the rain stops, this water will transpire back into the atmosphere. If that’s not enough retention capability, after the pavers retention space is filled, the water will pass into the specially designed base at a rate of 3mm/min. This also acts as a retention space that can be customised to the specific project.
Auckland averages 3.5mm rainfall/day and 60mm on a bad day. These pavers have ZERO run off!
See below quote from the Auckland Council Unitary Plan:
“The 95th percentile detention requirement and the 10 mm retention requirement can be provided in one single device; any storage volume provided to meet the 10 mm retention requirement can also be used to meet the 95th percentile detention requirement. Devices that can meet retention and detention requirements include raintanks (where the water is re‐used), permeable pavement, raingardens, gravel trenches and infiltration basins.”
Heat Island and Sound
With the increase in global warming, the heat island effect demands ever-increasing attention. Have you ever sat under an umbrella in a café and felt like you are in a sauna, with the heat radiating off the concrete paving all around you? How about walking on pavers or concrete surfaces in bare feet? Ouch!
Because of the micro-capillary structure inside the
See the image below showing a -10°C difference between the surrounding concrete and black HydroPaver.
Hydropavers do not need to be sealed and will not permanently clog with debris. All you need to do is give them a hose down/ scrub or light water blast and all silt, sand and dirt will be cleared. The colour is also baked into the ceramic paver and will not fade with time in harsh New Zealand conditions.
This product was picked up by Auckland Transport in Waiuku Town Centre for this very reason.
HydroPavers offer extensive benefits. Apart from their good looks, these include:
- Significantly reducing the impact of council site coverage limitations
- Reducing the heat island effect in built up areas
- Providing retention space following heavy rain
- No sealing required
- Low maintenance
- Quick installation
Sustainable Building Material
HydroPavers are a sintered ceramic paver, made from recycled porcelain tiles. Old tiles are crushed, pressed under 1600 Ton and then baked at 1200°C to form the
Porcelain is a very strong and hard-wearing material (they are still digging up pieces from Pompeii almost 2,000 years later!). HydroPavers have a compressive strength of 40MPA and are suitable for being driven on. Our 200×100 segment is perfect for driveways, both residential and commercial.
- Infiltration rate = 3mm/min
- Retention capacity = 11L/m2
- Compressive strength = 37MPA
- Heat island (up to 10˚C cooler)
- Coefficient of friction = 0.65
- 200x100x55 (suitable for traffic)
Sizes available on order: